Коллиматорный прицел Leupold DeltaPoint Pro Reflex Sight, 2.5 MOA Dot, 119688
Модель:  119688

Коллиматорный прицел Leupold DeltaPoint Pro Reflex Sight, 2.5 MOA Dot, 119688

Коллиматорный прицел Leupold DeltaPoint Pro является версией повышенной прочности ранее выпущенного прицела DeltaPoint. Усовершенствования включают в себя облегченный алюминиевый корпус, заключенный в оплетку из рессорной стали, асферический объектив, обеспечивающий широкое поле зрения с отличным качеством изображения, и полностью измененный корпус аккумулятора, что позволяет заменить батарею через верхнее отверстие доступа без необходимости снятия прицела с оружия. 

Модель Pro также оснащена функцией Motion Sensor Technology (MST) компании Leupold, представляющей собой датчик автоматической регулировки яркости, имеющий также и ручной режим, что позволяет выключить прицел, когда он не используется, а также вручную настроить интенсивность подсветки. 

Функция автоматического выключения позволяет выключать визирную сетку после периода бездействия. Кроме этого, для выключения прицела DeltaPoint на него можно надеть входящую в комплект поставки резиновую крышку. Время работы прицела DeltaPoint от батареи в два раза превышает время работы от батареи других коллиматорных прицелов. 

Линзы с покрытием DiamondCoat имеют высокую стойкость к царапинам, превосходящую военные стандарты.

Прицельная сетка 2.5-MOA Dot с подсветкой

Конструкция прицела

Технические характеристики
Голографический прицел нет
Тип прицела открытый
Крепление прицела weaver
Изменение яркости автоматическое
Кратность увеличения 1x
Диаметр объектива / размер линзы, мм 25x19
Регулировка яркости прицельной марки Есть
Прицельная марка Точка 2.5 MOA
Питание 1xCR2032
Цена деления механизма ввода поправок 1 MOA
Диапазон ввода поправок 60 MOA
Влагозащита Есть
Габариты, мм 46x33x33
Вес, г 41

Комплектация
Коллиматорный прицел Leupold DeltaPoint Pro
Салфетка
Гарантийный талон
Инструкция по эксплуатации

3 варианты установки

1.

2.

3.

Features
• DiamondCoat™, scratch resistant aspheric lens for brightness, and
resolution
• Motion Sensor Technology (MST™)
• Extremely durable, ultra light aluminum housing
• Small size and lightweight
• Unlimited eye relief
• For handguns, rifles and shotguns
• Wide field-of-view
• Blackened lens edges
• Waterproof to 33ft.
Specifications
• Magnification: 1.0x
• Sight window: 25.7mm x 17.5mm; 1.01” x 0.68”
• Elevation adjustment range: 60 MOA
• Windage adjustment range: 60 MOA
• 40 MOA per revolution of adjustment (1 MOA per click)
• Subtension of the aiming point : 2.5 MOA Dot, 7.5 MOA inscribed Delta
• Operating Temperature Range: -20°F to +120°F (-29°C to +49°C)
• Storage Temperature Range: -40˚F to +160˚F (-40˚C to +71˚C)
• Power Supply: 3V with one CR 2032 Lithium battery
• Dimensions: (LxWxH) 1.82” x 1.31” x 1.30” (46.1mm x 33.2mm x 33.0mm)
• Weight (with battery installed): 1.9oz. (53.8g)

Package Contents
• DeltaPoint Pro Reflex Sight, Delta (SKU 119687) or
• DeltaPoint Pro Reflex Sight, 2.5 MOA Dot (SKU 119688)
• (1) 3V Lithium battery (CR 2032)
• (1) Protective cover
• (2) M4x.7x15.8mm Torx® head screws for installing the sight on the
mounting plate
• (1) Torx® T-15 wrench
• (1) 1/16 Hex wrench
• Operating Instructions
Accessories (sold separately)
• Cross-Slot Mount (SKU 120056)
• Rear Iron Sight (SKU 120058)
• Cross-Slot Riser (SKU 120059)
• All Pistol Mounts Kit (SKU 120057)

Battery Installation
The unit operates with one commercially
available 3V Lithium battery (CR 2032) only.
Open the battery cover by pulling back the
battery door release latch. Insert the battery
so the positive side (+) is facing up and
close the battery cover. Push the battery
door release latch into place. Verify the white
witness mark is fully covered by the latch.
Keep the contact surface clean of dirt and
corrosion, cleaning with alcohol if necessary.
Illumination Operation
DeltaPoint Pro is equipped with eight illumination intensities. To activate
the DeltaPoint Pro press and release the power button. Cycling through
the illumination intensities is done by repeatedly pressing and releasing
the power button. When the highest or lowest setting is reached, the LED
will flash 5 times. To change the direction of adjustment, i.e., change from
increasing intensity to decreasing intensity, press and hold the power button
for 2 seconds and immediately release the button. Then continue pressing
and releasing to change intensity.
To power the DeltaPoint Pro off, press and hold the power button for
approximately 3 seconds, or until the LED turns off. When reactivated, the
unit will return to the last known setting.
Low Battery Indicator
The DeltaPoint Pro has a unique feature that flashes the aiming point 10
times when low battery power is detected. The operator will have several
hours of operating time in this mode before the sight is rendered inoperable
without a battery change.
Power-Saving Mode (Motion Sensor Technology™)
After the optic has been completely at rest for 5 minutes the sight transfers
to sleep mode, thus nearly eliminating all battery drain. Upon any movement
of the optic, the system powers up the LED to the last known setting. The
unit will flash 10 times before automatic power off. The motion sensor will
NOT reactivate the DeltaPoint Pro if it has been turned off manually.

Installation
Note: If you are installing the DeltaPoint Pro on a milled slide, the mount
base & dovetail are not required.
Installation on most handguns requires the use of one of the optional mount
bases (sold separately) . Leupold recommends utilizing a qualified gunsmith
to press/remove the rear sight from your handgun. Once the rear sight has
been removed, the appropriate dovetail replaces the rear sight, with the
part number facing up. Some installations (Kimber / Smith & Wesson M&P)
require the use of the set screws to be placed in the dovetail to hold it in
place and the M4x.7x15.8mm Torx® screws will fasten into the dovetail plate
extension.
The corresponding mount base for your pistol is placed on top of the slide
and over the dovetail with the flat part number side facing up through the
slot in the base. Once the dovetail and mount base have been placed on
the slide, the DeltaPoint Pro is placed on top of the base. The four holes
in the bottom of the DeltaPoint Pro will align with the four short posts
on the mount base and secure into the dovetail using the two included
M4x.7x15.8mm Torx® screws ( Figure 1). Secure the screws by applying 25
inch pounds of torque. Securing these screws creates a press-fit and will
hold the DeltaPoint Pro firmly in place. Call Leupold customer service for
details specific to your handgun. For rifle/shotgun applications, the CrossSlot
Mount allows fast and easy mounting on Weaver-style or Picatinny
bases/rails.
Smith & Wesson® Revolver Mount
(For use with Smith & Wesson Classic pre-drilled and tapped K, L, N & X frame
revolvers, including .500)
Remove the rear sight and retain the sight and all mounting hardware for
future use if necessary. Place the insert (10A) into the mount base (10B)
and set both pieces on the revolver as shown above. Install the two 6-48x
.210 screws through the dovetail insert and into the last two tapped holes,
nearest the hammer in the frame of the revolver (Figure 2). Tighten to 20
inch pounds.
10B Mount Base
10A Insert
6-48x .210 Screws
(Figure 2)
M4x 14mm Screws
(Figure 3)
Place the DeltaPoint Pro on the mount base so that the four holes in the
bottom of the DeltaPoint Pro will align with the four short posts on the
mount base and the screw holes in the sight and mount base align (Figure
3), then secure the sight with the two M4 x 14mm screws using 20 inch
pounds of torque.

Operating Procedure
Elevation and Windage Adjustment
Separate controls for the elevation and windage adjustments are found on
the top and right side of the sight. Turn the UP or “R” (RIGHT) screws with a
screwdriver, cartridge rim or coin. The windage adjustment mechanism has
limit stops at both ends.
Zeroing the Point-of-Impact
The DeltaPoint Pro windage and elevation screws move the point of impact
40 MOA (10” @ 25 yds) per revolution of the dial (1 MOA per click).
Boresighting the DeltaPoint Pro Reflex Sight
To make the boresighting process easier, Leupold recommends placing the eye
near the DeltaPoint Pro while making windage/elevation adjustments. As with
any boresighting procedure, be sure to follow all safety precautions prior to
boresighting, and make sure the boresighter has been removed from the barrel
prior to loading the magazine or chamber.
Leupold Gold Ring™ Full Lifetime Guarantee
If any Leupold Gold Ring product is found to have defects in materials or workmanship, Leupold &
Stevens, Inc. will repair, or if repair is not possible, either replace the product or refund the purchase
price, whichever you prefer. FREE. Even if you are not the original owner. No warranty card is
required. No time limit applies. This warranty excludes electronic components, which are subject to
the limited two-year warranty below.
Leupold Gold Ring Electronics Limited
Two-Year Warranty
This warranty covers any defects in materials and workmanship in the electronic components
of illuminated riflescopes/sights, flashlights, flashlight components, RX Rangefinders, GX
Rangefinders, Pin Caddie Rangefinder, RCX Cameras and Vendetta Archery Rangefinder. This
warranty lasts for two years from the date of purchase. If, during that two-year period, these
products are found to have defects in materials or workmanship, Leupold will repair, or if repair is
not possible, replace the product, free of charge.
Warranty Exclusions
Unfortunately, these warranties do not apply if the product has been modified, misused or has
been damaged by accident, abuse, or misapplication. To ensure this doesn’t happen to you, contact
Leupold Product Service before having any work or repairs done to your valuable Leupold optics.
Call 1-800-LEUPOLD or (503) 526-1400. If your Leupold product fails to perform in any way, please
contact a Leupold Product Specialist within our Product Service department to determine if the
problem can be solved without sending the product to Leupold. Many times, the problem can be
solved without sending the product to us. Leupold Technical Service will assist you with the problem
in the best and most efficient manner.
To Reach Leupold Product Service
Phone:
7:00 a.m. - 4:30 p.m. PST M-F 1-800-LEUPOLD
or (503) 526-1400
Fax:
24 hours a day, 7 days a week
(503) 352-7621
E-mail:
productspecialist@leupold.com
Parcel Service
Leupold Product Service
14400 NW Greenbrier Parkway
Beaverton, OR 97006-5791 USA
Postal Service
Leupold Product Service
P.O. Box 688
Beaverton, OR 97075-0688 USA
LEUPOLD, GOLDEN RING, MARK 4, the Golden Ring design, the circle-L reticle logo design, and
various other marks are registered trademarks of Leupold & Stevens, Inc. All marks, including
corporate logos and emblems, are subject to Leupold’s rights and may not be used in connection
with any product or service that is not Leupold’s, or in any manner that disparages or discredits
Leupold, or in a manner likely to cause confusion.
Certain other trademarks used in connection with Leupold products and services are the property
of their respective owners, and are used with permission. BOONE AND CROCKETT CLUB and BOONE
AND CROCKETT are registered trademarks of the Boone and Crockett Club. RMEF and ROCKY
MOUNTAIN ELK FOUNDATION are registered trademarks of the Rocky Mountain Elk Foundation.
ADVANTAGE TIMBER and ADVANTAGE TIMBER HD are trademarks or registered trademarks of Jordan
Outdoor Enterprises Ltd. MOSSY OAK BREAK-UP, MOSSY OAK BRUSH, MOSSY OAK OBSESSION, and
MOSSY OAK TREESTAND are trademarks or registered trademarks of HAAS Outdoors, Inc. A.R.M.S. is
a registered trademark of Atlantic Research Marketing Systems, Inc.
We reserve the right to make design and/or material modifications without prior notice.
Copyright © 2015 Leupold+Stevens, Inc. All rights reserved.
Caution: Boresighting the DeltaPoint Pro
Verify that the magazine of the firearm has been removed or emptied, and that there
is not a round in the chamber. Only after double checking the firearm, verifying it is
empty and safe, should you proceed with the boresighting process. Be sure to remove
the boresighter from the the barrel prior to loading the magazine or chamber.