Информация о товаре
Тример для гильз Frankford Arsenal Platinum Series Case Trim And Prep System, 903156
Тример предназначен для обрезания гильз при релодинге.
Регулируемая система цанг подходит для всех гильз калибров .17 Remington - .460 Weatherby.
Оснащен держателем для гильз, обеспечивающим скорость и точность работы.
Фасочные резцы расположены снаружи. Имеются фрезы для очистки гильз.
Под три выходных вала подходят все аксессуары для обрезки гильз с резьбой 8-32.
Ультра-жесткий резак не теряет свою заточку в течении долгой работы, позволяя легко и быстро обрезать гильзы.
Регулируемая подставка, позволяет выбрать удобное положение для работы с прибором.
Нескользящее основание.
Встроенный отдел для хранения необходимых инструментов.
Изготовлен из алюминия и стали.
Внимание! Необходим конвертер.
Не подлежит обязательной сертификации.
Доп. информация
Frankford Arsenal's Case Prep and Trim Station accurately trims brass in seconds. An innovative case holder with adjustable collet and bushing system indexes the case shoulder and can be set to precisely trim brass to the exact desired case length. Once the case holder is adjusted simply insert brass into the case holder as a collet aligns the case squarely with the hi-speed cutter. As the case mouth contacts the cutter it is trimmed until the case shoulder stops on an internal bushing. A series of three collets and six bushings (all included) accommodate any shouldered case from .17 Remington to .460 weatherby. In addition to the cutter, the station operates up to three additional tools at the same time. Inside and outside chamfer tools and primer pocket cleaners are included to fully prepare cases for loading. The heavy duty motor and drivetrain are optimized for durability and performance. Cutters and Chamfer tools are constructed of high quality hardened steel.
Frankford Arsenal Case Trim and Prep Center:
- Frankford Arsenal's Case Prep and Trim Station accurately trims brass in seconds
- An innovative case holder with adjustable collet and bushing system indexes the case shoulder and can be set to precisely trim brass to the exact desired case length
- Once the case holder is adjusted simply insert brass into the case holder as a collet aligns the case squarely with the hi-speed cutter
- As the case mouth contacts the cutter it is trimmed until the case shoulder stops on an internal bushing
- A series of 3 collets and six bushings (all included) accommodate any shouldered case from .17 Remington to .460 weatherby
- In addition to the cutter, the station operates up to 3 additional tools at the same time
- Inside and outside chamfer tools and primer pocket cleaners are included to fully prepare cases for loading
- The heavy duty motor and drivetrain are optimized for durability and performance
- Cutters and Chamfer tools are constructed of high quality hardened steel